Electroform 3 liter Super Delux Kit 5A Power Supply & Magnetic Stirrer Complete Kit LARGE - FREE SHIPPING
READY TO SHIP, I usually ship out sets ASAP.
Most starter sets that I see are 1 AMP and 1 Liter, this set is 5 amps and 3 LITERS, so you'll have a bigger capacity to start with compared to other sets. Plus it comes with advanced freatures such as a magnetic stirrer, anti corrosion titanium hardware and a titanium anode cage, saving you hours of time giving you even better results!
The 5A power supply and other accessories allows you to electroform larger items and even start your own small business. In addition this 5AMP power supply works in Constant Current and Constant voltage mode allowing you to expand and do gold plating, silver plating, nickel plating,electro polishing, electro cleaning, electro etching, brush plating, palladium plating, zinc plating , tin plating, small anodizing projects, and electrolytic patinas.
This is a great DELUX set it includes pretty much everything needed to start electroforming including a very easy to use power supply.
Bring Your Electroform KIt to the next level, get more consistent results. If you purchase this complete kit with power adapter and copper sulphate all you will have to supply is sulphuric acid to start electroforming.
MOST ITEMS NEEDED TO START ARE INCLUDE IN THIS KIT.
A. 3 Liter Tank
B. Power Supply
D. Levelling agent
E. Anode Cage
F. Anode Bag x2
G. Titanium Bus Bar
H. Titanium Clips
I. Cathode Clips
J. Power Leads
L. Dosing Syringe
M. Coffee Filter
N. Copper Sulphate ( high quality lab quality not root killer)
O. Magnetic Stirrer
P. Stirrer Power
Q. Stir Bar
R. Test Squares
S. Sulphur Patina
T. Power Adapter
As stated the expedited shipping takes 6-8 days. There is always the possibility that it gets hung up in customs. It's rare for packages from Singapore to get stuck in customs but there is a possibility that you will not get it in time for your show. I cannot be responsible for any delays and will fill out the customs for with the exact value & contents to avoid any issues. I cannot refund for delayed delivery.
Preparation Of Brightener
Add 50ML heated ( hot but not nearly boiling) distilled water to bottle, replace cap, and shake well until all solids are dissolved.
FOR BEST RESULTS PLEASE DO NOT FILL BOTTLE ONLY ADD 50ML DISTILLED WATER.
Whole batch must be made at same time other wise it will not work properly.
Start by Adding 5 drops per liter to copper sulfate based electroforming solution and then testing. The exact amount needed will be determined by your baths make up. Our customers have reported 5-10 drops per liter were used, start at 5 and work your way up. My baths use between 5-6 drops. Current setting can range from .1A/ in2- .3A/ in2 depending of electroformed project and the composition of your bath. Start low and slowly increase current until bright and shiny surface develops.
Do not mix with other brighteners or leveling agents as they may not be compatible.
For this brightener to work properly chloride is needed in the bath, the easiest way to do this is watch our video on Chloride Dosing.
Treats UP to 5 Liters
Top Up as needed
Fast copper deposition, use with higher current and cut plating times
Preparation of MINI Lustro Smooth-O
Add 8ML heated ( hot) distilled water to bottle, replace cap, and shake well until all solids are dissolved.
FOR BEST RESULTS PLEASE DO NOT FILL BOTTLE ONLY ADD 8ML DISTILLED WATER.
Whole batch must be made at same time otherwise it will not work properly.
Add .5-2ml per liter
Treats up to 5 liters
Top Up when needed
Less topping up than Lustro Electro Superbright
Check out the Preparation video on Youtube:
Electro Jeweler Joran
FAQ About Lustro Electro Brightener
@electrojewelerjordan. - Jewelry
@lustroelectro - Electroform Tips and tutorials
YouTube Electrojeweler JOrdan
Check back as we will be adding many new and innovative products that Electro Jewelers need.
Follow us on Instagram for tips, tricks, jewelry making instruction and special offers: